To back off your post, does anyone have one for Australia?

I don’t think that works on my Samsung TV, or my partners iPad though. :)

Although not especially effective on the YouTube front, it actually increases network security just by blocking api access to ad networks on those kinds of IoT and walled garden devices. Ironically my partner loves it not for YouTube but apparently all her Chinese drama streaming websites. So when we go travel and she’s subjected to those ads she’s much more frustrated than when she’s at home lol.

So the little joke while not strictly true, is pretty true just if you just say ‘streaming content provider’.

Is the copied file going to a usb? Is the usb fake? Otherwise I’m pretty sure your source is bad. Probably the disk sector if you’re sure the file was at some point complete.

Something like btrfs probably does block cloning or similar so a copy to the same disk probably just points at the same disk blocks as the original.

ffmpeg -v error -i file.avi -f null - 2>error.log

Check the source probably

Five words into the article says

Apple’s internal presentation from 2013

Literally at the top under TL;DR

deleted by creator

There have been a few cases where ports are blocked. For example on many residential port 25 is blocked. If you pay and get a static ip this often gets unblocked. Same with port 10443 on a few residential services. There’s probably more but these are issues I’ve seen.

If you think about how trivial these are to bypass, but also that often aligns to fixing the problem for why they’re blocked. Iirc port 10443 was abused by malicious actors when home routers accepted Nat- pnp from say an unpatched qnap. Automatically forwarding inbound traffic on 10443 to the nas which has terrible security flaws and was part of a wide spread botnet. If you changed the Web port, you probably also are maintaining the qnap maybe. Also port 25 can be bypassed by using start-tls authenticated mail on 587 or 465 and therefore aren’t relaying outbound mail spam from infected local computers.

Overall fair enough.

Mm, not quite, when say having 60+staff work in a single building model you need something that allows object locking so stag can work on part of a building and check it in and out.

I’m not the architect, I’m the sysadmin that designs and builds the server/network infrastructure for a half dozen architecture firms, some which have over 300 architects spread around Australia, Europe, and south East Asia. That mostly means running up servers to host BIM and BIM cache servers, as well as maintaining PIM servers.

To be honest I quizzed you because I honestly never heard of it and my life revolves around both revit and bim360, revit and revit self hosted bim servers, or archicad. Not that I do anything much in them, BIM managers generally administrate their own BIM instances and their teams. But some of the projects are in the billions of dollars that you’ll find on featured on the b1m YouTube channel.

Id argue that while the architects themselves are by and far the largest cost, the largest IT cost is the modelling software. I’ve even had some people using unreal engine to do parts of their work now especially for customer facing flythrough demonstrations and city view with time of day and all that.

So I’m pretty open minded to keeping my ears open to new software since I’m never sure what to expect. It would be interesting to see if it could ever be possible to do one of these megaprojects in open source. But my gut says it’s unlikely.

Does it connect to the same arcgis BIM servers so I can work with my coworkers, in real architecture projects?

After I followed the instructions and having 15 years of system administration experience. Which I was willing to help but I guess you’d rather quip.

From my perspective unless there’s something that you’ve not yet disclosed, if wireguard can get to the public domain, like a vps, then tailscale would work. Since it’s mechanically doing the same thing, being wireguard with a gui and a vps hosted by tailscale.

If your ISP however is blocking ports and destinations maybe there are factors in play, usually ones that can be overcome. But your answer is to pay for mechanically the same thing. Which is fine, but I suspect there’s a knowledge gap.

Are you sure? Did you want to troubleshoot this or did you just want to give up?

I’ve got two synology nas connected to each other directly for hyper backup replications at clients because both units are on cgnat isps and there’s no public IP. And it just works.

Didn’t understand that by willing you meant wanting.

I use Ubuntu, it’s the default for ROS. I tried debian but the instructions didn’t work instantly so I just as quickly gave up and went back to Ubuntu since I was busy. Lol.

Yes, but first go check which list you want to use since they’re a good starting point to understand a kind of level of tolerance and expectations around your experience.

There’s lots of lists around here’s a small sample:
https://arstech.net/pi-hole-blocking-lists-2023/

Be prepared for a bump in time outs as you work through things you might need (I blocked by accident a bunch of needed Microsoft services that I need to use during my job).

I haven’t edited my white list in months, maybe over a year. It’s going very well. I’ve been running pihole on ubuntu for more than 5 years as two virtual machines. I’m happy.

Yeah! Not sure why you get paid to work the only transaction that potentially needs to take place is paying for your work up front.

Why is money involved?

I’m not in America but the organisation for NIST recommends it in guidance now and its getting backing by the nsa

https://www.nsa.gov/Press-Room/News-Highlights/Article/Article/3215760/nsa-releases-guidance-on-how-to-protect-against-software-memory-safety-issues/

https://www.zdnet.com/article/nsa-to-developers-think-about-switching-from-c-and-c-to-a-memory-safe-programming-language/ https://www.malwarebytes.com/blog/news/2022/11/nsa-guidance-on-how-to-avoid-software-memory-safety-issues

I see this becoming required in the future for new projects and solutions when working for new governnent solutions. The drum is certainly beating louder in the media about it.

Not possible without a domain, even just “something.xyz”.

The way it works is this:

• Your operating system has some trusted certificate root authorities root certificates installed from installation of the OS. All OS have this, Linux, Windows, iOS, macos, Android, BSD.
• when your browser goes to a Web url and it is a https encrypted site it reads the certificate.
• the certificate has a certificate subject name on it. It also may optionally have some alternative names.
• the browser then checks if the subject name matches the Web url address. If it does, that’s check one.
• next it checks the certificate validity: it looks at the certificate chain of trust to see if it was signed by a intermediary and then the intermediary was signed by a root certificate authority. Then it can check if any certificate has been revoked along the way.
• if that’s all good, then you’ll open without a single warning, and you browse Web sites all day long without any issue.

Now, to get that experience you need to meet those conditions. The machine trying to browse to your website needs to trust the certificate that’s presented. So you have a few ways as I previously described.

Note there’s no reverse proxy here. But it’s also not a toggle on a Web server.

So you don’t need a reverse proxy. Reverse proxies allow some cool things but here’s two things they solve that you may need solving:

• when you only own one public IP but you have two Web servers (both listening to 443/80), you need something that looks at incoming requests and identifies based on the http request from the client connecting in ‘oh you’re after website a’ and 'you’re after website b".
• when you have two Web servers running on a single server, you have to have each Web server listening on different ports so you might choose 444/81 for the second Web server. You don’t want to offer those non standard ports to public so instead you route traffic via a reverse proxy inbound and it listens for both Web servers on 80/443 and translates it back to the server.

But in this case you don’t really need to if you have lots of ips since you’re not offering publicly you’re offering over tailscale and both Web servers can be accessed directly.

It’s possible to host a dns server for your domain inside your tailnet, and offer dns responses like: yourwebserver.yourdomain.com = tailnetIP

Then using certbot let’s encrypt with DNS challenge and api for your public dns provider, you can get a trusted certificate and automatically bind it.

Your tailnet users if they use your internal dns server will resolve your hosted service on your private tailnet ip and the bound certificate name will match the host name and everyone is happy.

There’s more than one way though, but that’s how I’d do it. If you don’t own a domain then you’ll need to host your own private certificate authority and install the root authority certificate on each machine if you want them to trust the certificate chain.

If your family can click the “advanced >continue anyway” button then you don’t need to do anything but use a locally generated cert.

Just fyi, as a sysadmin, I never want logs tampered with. I import them filter them and the important parts will be analysed no matter how much filller debugging and info level stuff is there.

Same with network captures. Modified pcaps are worse than garbage.

Just include everything.

Sorry you had a bad experience. The customer service side is kind of unrelated to the technical practice side though.

Start realising that the way you’re used to scrolling with your mouse wheel, is a cog between you and the service it’s moving. Actually you were using natural all along. It was the early touch pads that were wrong and nonsense.

Luckily on your own network you have control over these decisions! Especially with source and destination firewall rules.