Today we’re expanding the list of devices that can run Tailscale, bringing secure remote networking to the Apple TV. The newly released tvOS 17 offers support for VPNs, and we’re proud to say Tailscale is among the first to use this new feature. You can now add your Apple TV directly to your tailnet, unlocking three powerful new use cases that we’re excited to share.
The bulk of the traffic between two Tailscale nodes is direct between the nodes. They mainly use the Tailscale servers to help them find each other (NAT hole punching) and establish a connection.
You’re kidding! I thought all the traffic went through tailscale. So it’s basically just establishing the connection, then I’m only limited by upload/download speed of the NAS and the client?
Man, that’s great news. Though I may have some extra set up to do because I tried once with a decent internet connection and couldn’t get plex working over tailscale.
Plex has issues with VPNs unfortunately. It wants you to go through them whenever you connect to your server, and this means it needs to know where your server IP/domain is. But if you have situations where the IP/domain changes, like a VPN, it can get confused.
It’s one of the reasons that made me give up Plex back in the day. (Holding your accounts hostage was the other one.)
It’s going to depend on the devices involved, but I get about 600 megabit or so between two computers over tailscale on my network (really, wireguard). That’s what, 10 HD video streams? Of course, it’s going to depend on device cpu capability and network bandwidth.
On your own network? I’m not sure the reason to use tailscale between computers on the same network, nor if that’s really relevant to the discussion. If tailscale was capable of 600mbps from outside the network then that would be another story
That 600mbps is the throughput of the encryption on those devices. It’s no different crossing networks, but the speed will be limited by the network speed. The benefit of a p2p vpn is that you don’t need to shut it off when you join the same network. The devices remain accessible at the same ip whether they are on the same network, or if one is somewhere else. The overhead is negligible and you gain the security isolation that would normally require subnets and a firewall.
In the end, yes, I can stream HD video just fine from another network. For most people, the limitation will be their home ISP’s uplink speed.
I’m surprised any VPN would be strong enough for streaming video of anything other than potato quality
The bulk of the traffic between two Tailscale nodes is direct between the nodes. They mainly use the Tailscale servers to help them find each other (NAT hole punching) and establish a connection.
You’re kidding! I thought all the traffic went through tailscale. So it’s basically just establishing the connection, then I’m only limited by upload/download speed of the NAS and the client?
Usually yes! There will be some minor overhead from both nodes keeping in touch with the Tailscale command server but mostly they talk to each other.
Read this though to see if there’s a case where direct connection might not be possible: https://tailscale.com/kb/1181/firewalls/
Man, that’s great news. Though I may have some extra set up to do because I tried once with a decent internet connection and couldn’t get plex working over tailscale.
Plex has issues with VPNs unfortunately. It wants you to go through them whenever you connect to your server, and this means it needs to know where your server IP/domain is. But if you have situations where the IP/domain changes, like a VPN, it can get confused.
It’s one of the reasons that made me give up Plex back in the day. (Holding your accounts hostage was the other one.)
oh wow, thanks for that insight. So jellyfin in this use case would be superior?
It’s going to depend on the devices involved, but I get about 600 megabit or so between two computers over tailscale on my network (really, wireguard). That’s what, 10 HD video streams? Of course, it’s going to depend on device cpu capability and network bandwidth.
On your own network? I’m not sure the reason to use tailscale between computers on the same network, nor if that’s really relevant to the discussion. If tailscale was capable of 600mbps from outside the network then that would be another story
That 600mbps is the throughput of the encryption on those devices. It’s no different crossing networks, but the speed will be limited by the network speed. The benefit of a p2p vpn is that you don’t need to shut it off when you join the same network. The devices remain accessible at the same ip whether they are on the same network, or if one is somewhere else. The overhead is negligible and you gain the security isolation that would normally require subnets and a firewall.
In the end, yes, I can stream HD video just fine from another network. For most people, the limitation will be their home ISP’s uplink speed.