Description M5PoECAM-W V1.1 is a programmable PoE camera based on the "ESP32+W5500" solution, featuring a 3-megapixel OV3660 image sensor with a 65° field of view. It integrates PoE (power over Ethernet, max power consumption 6W) and Wi-Fi functionality. Equipped with 16MB Flash and 8MB PSRAM, programs can be downloade
Not hard at all. Looks like it comes loaded with a webserver and a way to set time lapse from a browser. There’s cheaper ways to do this like an ESP32-CAM if you don’t need PoE, but that involves another layer of complexity via a UART adapter and using something like the Arduino IDE to upload code to the board.
Thanks heaps for the reply. That’s awesome news! Being Poe makes it easier in my mind but I’ve defiantly gone down a bit of a rabbit hole since this turned up in my feed. If I can wrangle this one I might be frequenting here more fun stuff.
Not hard at all. Looks like it comes loaded with a webserver and a way to set time lapse from a browser. There’s cheaper ways to do this like an ESP32-CAM if you don’t need PoE, but that involves another layer of complexity via a UART adapter and using something like the Arduino IDE to upload code to the board.
Thanks heaps for the reply. That’s awesome news! Being Poe makes it easier in my mind but I’ve defiantly gone down a bit of a rabbit hole since this turned up in my feed. If I can wrangle this one I might be frequenting here more fun stuff.