I want to build a proper server with room for 40+ HDDs to move my media server to and have RAID 1. I know a lot about PCs and software, but when it comes to server hardware I have no clue what I’m doing. How would I go about building a server that has access to 40+ RAID 1’d HDDs?

  • GasMaskedLunatic@lemmy.dbzer0.comOP
    link
    fedilink
    arrow-up
    1
    arrow-down
    4
    ·
    9 months ago

    Doesn’t that keep more than two copies? RAID 1 is expensive enough as is. I just need to be able to pop in a replacement drive if one fails so I don’t lose data.

    • redditron_2000_4@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      9 months ago

      The chance of a rebuild taking longer than a failure occurring is non zero. RAID 1 is less protection that raid 50 or raid 60, plus depending on how many disks you have you will save space and get better performance.

      But you need a good controller.

      • GasMaskedLunatic@lemmy.dbzer0.comOP
        link
        fedilink
        arrow-up
        1
        ·
        9 months ago

        I’ll have to watch a video later I guess. I know it’s possible to lose a drive while it’s rebuilding, but it’s improbable, and I figured it takes more space, I’m okay taking that risk since I’m not handling irreplaceable data, just my personal TV/movie archive for now. But if it can save space, I’ll have to consider it.

        • computergeek125@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          9 months ago

          It is far less improbable than you think, especially if all of your drives have similar age/wear - as would be the case if you bought all 40 around the same time.