Hey! You have the same shitty AIO that Comcast sent me! It overheated and tries to melt itself down all the time. Luckily it gets so hot that the adhesive melted and the screws were easily visible. I just took the chassis off and it mostly doesn’t overheat anymore.
Crazy, the thing is basically hollow and was right next to the window and would still overheat. The bottom doesn’t allow for any air intake so it sufffocates. Also it’s 80% plastic because they couldn’t be assed to add aluminum heatsinks.
Oh my goodness, this is the first time I’ve seen the innards of that AIO (all in one?) on the internet. Thank you! Where were the screws located on it?
They are all on the bottom, the rubber feet/stripping on mine started coming off, found it by mistake. One has a sticker, but those don’t really hold up to void warranties anyways. Plus, I’m just gonna super glue the rubber feet back on after, hahah. I just tucked the screws and the chassis in the back of a closet for now. No tabs or anything to break when uninstalling it, either!
Edit: yeah, all in one! Mine is one of those modem / wifi combos. I set it to bridge mode so I could use my own router, and the thing still overheated even though it was just acting as a modem, smh. Annoying how bad it is. Luckily, shucking it will clear up 9/10 problems. Put some tape over the LED if you sleep in the same room as it, it’s very bright when exposed.
So I finally shucked mine and found a 40mm fan in the bottom that wasn’t running. In fact, I don’t think it ever has run since I never feel any air flow or hear anything. Did your XB8 have a fan?
Though one has to wonder why it needs cooling at all. I’ve never had an actively cooled network device before, and most of my equipment hasn’t even gotten more than marginally warm due to excellent venting.
Oh yeah that would be a great alternative! It’s funny, I’ve been wondering the same. It’s in bridge mode, has a MASSIVE heatsink and a fan but is still super hot. Does modems really get that hot? I’d be curious to inspect what kind of traffic is coming out of the modem because my pihole isn’t catching anything from my router-onwards.
Hey! You have the same shitty AIO that Comcast sent me! It overheated and tries to melt itself down all the time. Luckily it gets so hot that the adhesive melted and the screws were easily visible. I just took the chassis off and it mostly doesn’t overheat anymore.
Crazy, the thing is basically hollow and was right next to the window and would still overheat. The bottom doesn’t allow for any air intake so it sufffocates. Also it’s 80% plastic because they couldn’t be assed to add aluminum heatsinks.
Oh my goodness, this is the first time I’ve seen the innards of that AIO (all in one?) on the internet. Thank you! Where were the screws located on it?
They are all on the bottom, the rubber feet/stripping on mine started coming off, found it by mistake. One has a sticker, but those don’t really hold up to void warranties anyways. Plus, I’m just gonna super glue the rubber feet back on after, hahah. I just tucked the screws and the chassis in the back of a closet for now. No tabs or anything to break when uninstalling it, either!
Edit: yeah, all in one! Mine is one of those modem / wifi combos. I set it to bridge mode so I could use my own router, and the thing still overheated even though it was just acting as a modem, smh. Annoying how bad it is. Luckily, shucking it will clear up 9/10 problems. Put some tape over the LED if you sleep in the same room as it, it’s very bright when exposed.
So I finally shucked mine and found a 40mm fan in the bottom that wasn’t running. In fact, I don’t think it ever has run since I never feel any air flow or hear anything. Did your XB8 have a fan?
Yeah, mine has one and it runs, but infrequently and at such a slow RPM it does very little. Shucking it was the only thing that seemed to help!
They should have gone with one of these thicker 30mm (thick) fans. They move a lot more air than even a standard PC fan, but do it quietly.
https://www.phanteks.com/PH-F120T30.html
Though one has to wonder why it needs cooling at all. I’ve never had an actively cooled network device before, and most of my equipment hasn’t even gotten more than marginally warm due to excellent venting.
Oh yeah that would be a great alternative! It’s funny, I’ve been wondering the same. It’s in bridge mode, has a MASSIVE heatsink and a fan but is still super hot. Does modems really get that hot? I’d be curious to inspect what kind of traffic is coming out of the modem because my pihole isn’t catching anything from my router-onwards.
Not sure! Does seem…oddly inefficient, though.